Products & Technologies

Seek Your Custom Solution

LEAF® C2 Resins

LEAF resins logo

LEAF® C2 resins are low-emission adhesives that can contribute to compliance with CARB Phase 2 and some green building standards.

Depending on a manufacturer’s process and requirements, LEAF C2 adhesives can be a urea-formaldehyde or melamine-urea-formaldehyde formulation. Compatible with existing equipment, LEAF C2 resins have been used in a variety of manufacturing processes. They can also be used in combination with specialized scavenger systems for additional options.


Composite panels, Hardboard, Medium Density Fiberboard (MDF), Wood adhesives

Product Composition

Thermosetting resins


Clear to opaque colored liquid


May help finished products meet CARB Phase 2 requirements and ANSI standards A208.1-2009 section 3.4 and Tables A and B.

Typical Properties
Solids Content, %
pH@ 25°C
Water Dilutability @ 25°C
50:1 minimum
Specific Gravity
1.28 – 1.32
Storage Temperature, °C
Shelf Life
Two weeks


Tank Truck, Totes

Storage and Handling

LEAF C2 resin should be stored in clean tanks or containers at temperature up to 30°C (86°F). Refer to the Material Safety Data Sheet for information on the safe handling of this product.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™