Products & Technologies

Seek Your Custom Solution

GP® Wood Adhesive Catalysts

GP® liquid catalyst systems are designed specifically for composite panel production. These products can aid in complying with:

  • California Air Resource Board (CARB) Airborne Toxic Control Measure (ATCM) for Composite Panels Phase 2 emission standards
  • ANSI standard A208.1-2009 defined formaldehyde emissions set forth by sections 3.4.
  • Some operations-targeted physical properties defined by ANSI standard A208.1-2009 Tables A and B.

They can also aid in controlling cure speed. GP Chemicals specializes in custom-formulating catalyst systems for your specific mill needs, conditions and certifications.


Composite panels, Hardboard, Medium Density Fiberboard (MDF), Wood adhesives

Product Composition

Liquid catalyst


Clear to slightly shaded in color


Tank Truck, Totes

Storage and Handling

Catalyst products should be stored in clean tanks or containers at temperatures up to 30°C (86°F). Dependent on concentration, keep from freezing. Refer to the Material Safety Data Sheet for information on the safe handling of these products.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™