Products & Technologies

Seek Your Custom Solution

GP® Moisture-Resistant Wood Adhesive Binder Resins

Available for the manufacture of moisture-resistant particleboard, hardboard and medium density fiberboard (MDF). These products can aid in complying with:

  • California Air Resource Board (CARB) Airborne Toxic Control Measure (ATCM) for Composite Panels Phase 2 and ANSI standard A208.1-2009 defined formaldehyde emissions set forth by section 3.4
  • Some operations-targeted physical properties defined by ANSI standard A208.1-2009 section 2.8 and Tables A and B.
Applications

Composite panels, Hardboard, Medium Density Fiberboard (MDF), Wood adhesives

Product Composition

Thermosetting resins

Appearance/Form

Clear, opaque or amber colored liquid

Certifications

ANSI moisture resistant standard defined by section 2.8.

Typical Properties
Solids Content, %
55-65
pH @ 25°C
7.5-9.0
Water Dilutability @ 25°C
50:1 minimum
Specific Gravity
1.14-1.32
Storage Temperature, °C
Dependent on individual resin
Shelf Life
Two Weeks

Packaging

Tank Truck, Totes

Storage and Handling

Products should be stored in clean tanks or containers. Storage temperatures are dependent on the individual resin. Refer to the Material Safety Data Sheet for information on the safe handling of these products.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™