Products & Technologies

Seek Your Custom Solution

GP® 7565 Resin

GP® 7565 resin is used as a crosslinker for hydroxyl containing polymers such as epoxies, polyesters, vinyls and acrylics. GP 7565 resin provides outstanding chemical resistance. It can be emulsified into water-based epoxy resins. It is used where light colored coatings are required and in other applications.


Coatings, Corrosion inhibitors, Protective coatings, Protective coatings: Can, Protective coatings: Drum and pail, Protective coatings: Metal protection, Protective coatings: Pipe

Product Composition

Heat-reactive phenolic resin solution in butanol



Typical Properties
Solution in n-Butanol
Viscosity @25°C, cP (mPa*sec)
2500 - 4000
Solids, wt. %
68.5 - 71.5
Specific Gravity @25°C
Approximately 1.08



Storage and Handling

GP 7565 resins are heat-reactive resins with a limited shelf life. Extended storage at high temperatures should be avoided to prolong the useful life of the resins. It is suggested that the resin be stored at or below 60°F in order to maximize storage life. GP 7565 resin should be used in a well-ventilated area.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™