Products & Technologies

Seek Your Custom Solution

GP® 7565LF Crosslinking Resin

GP® 7565LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics/. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance.


Coatings, Corrosion inhibitors, Protective coatings, Protective coatings: Can, Protective coatings: Drum and pail, Protective coatings: Metal protection, Protective coatings: Pipe

Product Composition

Crosslinking phenolic resin in n-butanol solution



Typical Properties
Viscosity @ 25°C, cP (mPa*sec)
Solids, wt, %
68 - 72
Specific Gravity @ 25°C
Approx. 1.08



Storage and Handling

It is recommended that heat-reactive GP 7565LF Crosslinking Resin be stored in a dry place at or below 60°F (15°C) in order to maximize storage life. Extended storage at high temperatures should be avoided to prolong the useful of the resin. Storage life will be determined by your specific formulation. This product should be stored and used in a well-ventilated area.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™